Skip to product information
1 of 21

[PRE-ORDER EXTRAS] Qwertykeys Neo65

[PRE-ORDER EXTRAS] Qwertykeys Neo65

Regular price RM662.00
Regular price Sale price RM662.00
Sale Sold out
Case Colour


  • Delivery Date: Early June 2024 

Unibody Case

Our design code is based on minimalism. The Neo 65 features an ultra-slim side bezel that blends seamlessly with any desk setup, regardless of the theme.

Neat Side Profile

We chose an inward-sloping edge to complement the minimal design on the front. This also makes it easier to pick up the keyboard.

Brass Weight with Orbit Engraved Logo

The name Neo not only refers to the designer but also represents Near Earth Objects.

We opted for the orbit as the logo for the Neo series to symbolize the interconnection and alternation of our products.

Dual-Mounting System

  • Support both PCB gasket mount and gummy O-ring mount (not compatible with plateless configurations)
  • With our specially designed gaskets, the PCB and plate can be securely held in place, even if the case is flipped upside down
  • Finely-tuned sound profile - no hollowness nor case ping without the use of any foam
  • Reserved groove for the O-ring at the blocker - no need to forcefully bend the O-ring anymore, so the assembly experience can be more efficient and enjoyable
  • O-rings with different stiffness levels are available to provide varying typing feedback

Selective PCBs

  • We selected the 1.6mm PCB without flex cut to achieve a louder and fuller sound profile
  • All PCBs are QMK-based, VIA supported
  • Two PCB options:
    • Tri-mode Hotswap
      • Support wired, Bluetooth, and 2.4GHz connection
      • Support both ANSI and ISO layout
      • NKRO
      • Polling rate: 1000Hz in wired and 2.4Ghz mode; 125Hz in BT mode
    • Wired ANSI Hotswap
      • ANSI layout
      • USB-C connection only
      • NKRO
      • Polling rate: 1000Hz

Plates with Distinctive Characters

Hard ——————————————————> Soft:

Carbon Fiber > Aluminum > FR4 > POM > PC

Clack ——————————————————> Thock:

Carbon Fiber > Aluminum > FR4 > POM > PC


  • Typing angle:8 degree
  • Front height:17mm
  • Size:310.35mm * 107.8mm
  • Weight:
    • Before build:0.97kg
    • After build:1.32KG

Content List

  • Case
    • Including one pre-installed external weight
    • Two 2200 mAh batteries will be installed inside of the bottom case for orders with Tri-mode PCBs
    • Orders with wired PCBs will receive fillers for the battery compartments
  • PCB Kit
    • PCB of your choice
    • 1x PE sheet
    • 1x PCB Foam
    • Standoffs
    • Tri-mode PCB comes with a 2.4Ghz dongle
  • Plate of Your Choice (or Plateless)
  • Poron Case Foam
  • PCB Daughterboard - installed
  • Silicone Gaskets
  • O-ring (50 duro) x 1
  • Rubber feet in grey and black
  • Weight screws in silver and black
  • Daughterboard FPC cable
  • Free Gifts (Not covered by warranty):
    • Keyboard carrying case
    • 1x Hex screwdriver
    • 1x Philip screwdriver
    • 1x Keycap & Switch puller
    • 1 set of 65% PCB clip-in NeoStab
    • USB-C cable

Pre-Order Terms & Conditions

  1. There will be an order cancellation and refund fee amounting to: 
    • 10% - for cancellation during the pre-order period.
    • 30% - for cancellation after the pre-order period until delivery.
  2. No cancellation allowed for Atome transactions.
  3. No amendments can be made to the specification once the payment has been made.
  4. The customer has agreed to the acceptable quality standard disclaimer provided by Qwertykeys.
  5. Fulfillment schedule will be in accordance to the production and delivery schedule by Qwertykeys, MKB will not be liable for the delay of the pre-order.
  6. For physical store purchases, please present the original physical receipt upon collection.
  7. The customer has agreed on the terms and condition stated above upon making payment for the pre-order.

View full details